Computer Was Restarted Because Of A Problem Mac

Posted onby

How to fix 'A problem occurred with this webpage so it was reloaded' issue?

Mobile and Wi-Fi networks are expanding exponentially, and so more and more people are switching between their computers and mobile devices. Most websites are fully responsive and can be viewed using computers or mobile devices such as phones, tablets etc. Despite this, even when developers create perfectly responsive websites, you might encounter issues caused by your device performance or browser settings. For example, the Safari Internet browser sometimes displays the 'A problem Occurred with this Webpage, so it was Reloaded' error message, after which the browser becomes unusable. This happens because the webpage is reloading every five seconds (or more frequently) and can lead to a situation whereby the website does not load at all.

Computer Was Restarted Because Of A Problem Mac

If your Mac is using a firmware password, the lock icon appears when you try to start up from another disk or volume, such as an external drive or macOS Recovery. Enter the firmware password to continue. System lock PIN code Your Mac asks for a PIN code when it has been remotely locked using Find My. One of the issues you could run into on a Mac is an error message that keeps on popping up and saying “Your computer restarted because of a problem”. When this error occurs, your Mac either shuts down or restarts all of a sudden.

This issue is common amongst iPhone and especially iPad users. The problem is often directly related to the webpage you are attempting to open, but can also be a result of the device or application in use. The most common conditions under which 'A problem occurred with this webpage so it was reloaded' is encountered include ordinary use of browser features such as pinch-zooming a photo or image on page, adjusting the page magnification with finger spread, and using Safari's Reader mode. If you experience this issue with a particular page or website, simply inform the site administrator of the situation. If you encounter this issue frequently on a number of sites, continue reading this article for possible solutions.

Table of Contents:

It is recommended to run a free scan with Combo Cleaner - a tool to detect malware and fix computer errors. You will need to purchase the full version to remove infections and eliminate computer errors. Free trial available.

Basic steps to solve the 'a problem occurred with this webpage so it was reloaded' error

  1. Close all running applications by double pressing the Home button and throwing all applications from the list - just swipe up on all open apps.
  2. Clear your web browser history and website data by opening Settings. Then choose Safari and scroll down to find Clear History and Website Data.
  3. Reset your network settings by entering Settings, and then the General section, choose Reset and tap Reset Network Settings.
  4. Restart your mobile device by holding the Sleep/Wake button until the red slider pops up. Drag the slider and wait until it completely shuts down. Start your device again by holding Sleep/Wake button.
  5. Perform a Forced restart on your device.
    • iPhone 6s or below, iPad and iPod Touch users should hold the Home and Power buttons until they see the Apple logo.
    • If you own an iPhone 7 or iPhone 7 Plus, press and hold the Side and Volume down buttons for at least 10 seconds, or until you see the Apple logo.
    • Forcibly restart iPhone X, iPhone 8, and iPhone 8 Plus by clicking Volume Up, and then Volume down and finally press and hold the Side button until you see the Apple logo.

Additional methods to fix 'a problem occurred with this webpage so it was reloaded' problem

  • Block cookies.
    • Turn on cookies blocking by going to settings, locate Safari, select Block Cookies and choose Always Block.
  • Ensure your Date and Time is correct.
    • This often this causes a number of issues. To check, open Settings and look for Date & Time in the General section. Verify the information is correct, otherwise update it. Attempt to disable/enable set automatically, wait 10-20 seconds between toggling.
  • Manage Speech settings.
    • Open Settings, and then choose Accessibility under General and select Speech. Disable Speak Selection and Speak Screen - this has been known to resolve the problem for many users.
  • Turn OFF JavaScript.
    • Select Safari in Settings, and then scroll down to Advanced. Toggle JavaScript off, otherwise toggle it on.
  • Adjust Safari Defaults.
    • Go to Settings and find Safari, tap clear History and Website Data. Disable Search Engine Suggestions and Safari Suggestions.
  • Manage Background App Refresh.
    • Disable this feature by entering Settings. Select General and look for Background App Refresh. Turning off the refreshing might solve your issue and, additionally, decrease battery draining.
  • Clean up memory.
    • Many users of Apple products encounter 'a problem occurred with this webpage so it was reloaded', simply because their devices lack available RAM/memory. This can affect iPad 2 and earlier iPads, iPhones and iPod Touches owners, since they use latest available version of Safari, which is based on the latest Apple products with much more RAM available. In this case, the best solution would be to try to free up some space. Open Settings, choose General, and select Storage (or Storage and iCloud for earlier iOS). Study the available space (not iCloud space). Many users report that after freeing up space, the problem disappeared.
  • Test third party web browser.
    • Different apps have individual features that might be related to the issue. Furthermore, you may discover that one of your apps has abilities not available in Safari. Your device is able to keep several web browsers, so bear in mind that you can switch to another browser and always return to Safari.
  • Reinstall Java.
    • If you experienced this issue on a Mac device immediately after reinstalling Java, uninstall it and perform a fresh installation.

Great. I did #2. “Clear web browser history and website data”. All that happened was I lost all my open tabs. Safari still keeps crashing on my iPhone. Too bad I turned it off and on after I had already erased all my tabs. Turning your phone off and on should fix the problem.

This is nonsense. Safari is just a piece of garbage. These things just waste your time. It's just a buggy app that doesn't work with perfectly good web pages.

In my case, setting the systemwide font to bold letter display (to have a sharper screen image in bright sun conditions) caused this error. Switching back to default letter display made the error go away. Possible reason: Some cookies might perhaps use bold fonts to identify command lines?

The best solution I found is using the (tvcast) Chromecast app in Google Play store.

É mais fácil mudar de navegador... Isso já ta enchendo o saco no Mac OS...

After you boot your Mac for a while, it restarts, and restarts over and over again. You can’t even complete a document. This is very frustrating. But don’t worry. Mac restarting loop is a common issue. Many Mac users have reported this issue. You can fix the problem easily with one of the solutions below.

You probably receive one of the below error messages:

Your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up.

You need to restart your computer. Hold down the Power button for several seconds or press the restart button.

Computer Was Restarted Because Of A Problem Mac

The problem is sometimes due to what is known as a “kernel panic”, an unrecoverable error causing system not to be able to get back on track and requiring a restart. The error generally is caused by third-party software or hardware. We’ve put together five solutions below to fix the problem. You may not have to try them all; just work your way down the list until you find the one that resolves your Mac restarting loop issue.

Solution 1: Disconnect peripheral devices

Your Mac restarting loop issue can be caused by third-party hardware. If you’ve connected any external device that’s not coming with your Mac, disconnect them and see if this fixes the problem. Here’s what you need to do:


1) Shut down your Mac.

2) Disconnect ONE of your peripheral devices from your Mac (for example, an external hard drive, a USB drive).

3) Start your Mac and check to see if the problem persists. If the problem is gone, the problem probably is caused by the device you disconnected.

4) Repeat the steps above for ALL peripheral devices you connected to your Mac until you find out the one causing the problem.


If the problem is not caused by the peripheral devices, read on to try other solutions.

Solution 2: Troubleshoot software issues

Faulty or corrupt software could be one of the reason causing Mac keeps restarting. To fix the problem, you can troubleshoot the software issues by updating software and removing recently installed software.

2a. Update all software

You can update all software via App Store. If you’re not sure how to do it, refer the steps below.

1) Click the App Store icon at Dock.

2) Click Updates. Then you’ll see a list of software that have new updates.

3) Click the UPDATE ALL button then follow the on-screen instructions to download and install the update.

2b. Remove recently install software

The problem may be caused by some newly installed software. You can find out the software installed before the problem occurs, then completely uninstall the software. If you’re not sure how to completely uninstall software, refer the steps below.

1) Click the Finder icon at Dock.

2) Click Applications.

3) Drag the software to Trash. Repeat this to all software you wish to uninstall.

4) Right-click on Trash and select Empty Trash.

5) Restart your Mac and check to see if the restarting loop issue is resolved.

If Solution 2 doesn’t work for you, try Solution 3.

Solution 3: Repair corrupted files

If some of the system files are corrupted, your Mac may keep restarting. You can repair the corrupted files with Disk Utility. To do so:

1) Click the Finder icon at Dock.

2) Click Applications.

3) Type Disk Utility in the search box.

4) Double-click on Disk Utility to open the application.

5) Click your startup disk in the left pane.

6) Click First Aid in the right pane.

7) Follow the on-screen instructions to complete the procedure.

8) Restart your Mac and check to see if your Mac restarting loop issue is resolved.

If the problem persists, try Solution 4.

Solution 4: Erase the startup drive and install OS X

This may be not a perfect solution, as it’ll lead all information stored on the drive o be lost. But if the above solutions don’t work out, you can try to erase the startup drive and reinstall the system.

Note: Erasing the disk removes all the information from the disk. Be sure to backup the information you want to keep to an external device

Follow these steps:

1) Click the Finder icon at Dock.

2) Click Applications.

3) Type Disk Utility in the search box.

4) Double-click on Disk Utility to open the application.

5) Click your startupdisk in the left pane, then click Erase.

6) Click the Format pop-up menu, choose Mac OS Extended, enter a name, then click Erase.

Your Computer Restarted Because Of A Problem Mac Vmware

7) After the disk is erased, choose Disk Utility > Quit Disk Utility.

8) Select Reinstall macOS, click Continue, then follow the on-screen instructions.

Computer Was Restarted Because Of A Problem Macbook

Solution 5: Contact Apple technical support

The last tip for you is contact Apple technical support to help resolve the problem. You can contact them by calling them, or find a local Apple Authorized Service Provider or Apple Store with a Genius Bar for further assistance.

Your Computer Restarted Because Of A Problem Mac Black Screen

Hopefully the solutions above help you resolve your Mac keeps restarting issue. If you have any questions, please leave a comment below. We’d love to hear of any ideas and suggestions.