I Restarted My Mac And Now It Wont Turn On

Posted onby
All-mighty Mac system monitor

Sometimes it’s the single most effective solution when your Mac won’t turn on or continuously crashes. To start up your Intel-based Mac in safe mode: Shut down your Mac and wait 10 seconds. Restart your Mac and press the Shift key. Power on your Mac without peripherals attached. If your Mac starts up without issue when you don't have any peripherals attached, you'll know that a faulty peripheral or cable caused the gray screen problem. Shut down your Mac again, reconnect a peripheral, and then restart your Mac. Continue this process until you find the bad peripheral. I have an iMac.2.9 Ghz, 8gb, 1tb, Late 2013, 21.5 inches using Catalina MacOS. I am facing an issue where my mac shuts down automatically when in sleep mode and then fails to start again. After trying all the possible ways (safe mode, restore from capsule, repair disks) to restart I finally deleted everything and then installed everything fresh.

Control CPU, memory, and whatnot with iStat Menus app.

If you’ve ever used a Windows computer before for comparison, you know that Macs in general are far more reliable and rarely let you down. But the inevitable happens with technology: computers get old, internal memory wears out, battery cycles get shorter and shorter.

So if one day you woke up but your Mac didn’t, it might feel like your life has stopped when you think about all the lost in-progress work, photos, documents, etc. Don’t worry — all you need to do is methodically follow a series of steps to bring your machine back to life.

Charge Your iPhone Battery. It may sound obvious, but make sure your iPhone's battery is charged.

200+ best apps to fix your Mac

Get Setapp, a single toolkit with many apps that will keep your Mac healthy. Fix any problem that hampers your progress instantly.

Solutions For MacBook Not Turning On

When your MacBook Air or MacBook Pro won't turn on, it’s very rare that the problem is with the whole setup — more likely one of the components is misbehaving, which can range from your display to software glitches. Our task here is to isolate this problem to solve it.

The first step is to check, as obvious as it sounds, whether your Mac has any battery life left (or in the case of iMacs whether the cable is connected correctly). Try unplugging and plugging your Mac back in. If you have an older MacBook, your MagSafe cable will show you a green light if the computer is charged and amber if it’s still charging.

As a rule, try to only use Apple-made cables. Even though they could be more expensive (check eBay or Craigslist for secondhand ones), they are more likely to be safe for your Mac and not put extra strain on your battery life. Also, don’t forget to test your outlet — it might just be that you’re using a faulty one.

1. Boot up your Mac

Once you know your Mac is powered properly, try turning it on by pressing the power button. Do you hear the fans or any sounds at all? If yes, it might be that your Mac’s problem is with software. If your Mac won’t boot at all, it might be something to do with hardware.

In both cases, when you MacBook Pro or MacBook Air won’t turn on, make sure to disconnect all keyboards, mice, external HDs, and so on to make sure they are not part of the problem. If nothing has changed, you need to do a power cycle.

2. Go through a power cycle

Why Won't My Mac Restart

If you’re certain that your MacBook Pro won't boot, a good option is to enable a power cycle, which is basically a forced restart.

To do a power cycle:

  1. Shut down your Mac by pressing the power button (keep pressing)

  2. Unplug all the power cables

  3. Hold the power button for 10 more seconds

  4. Restart the Mac as usual

Hopefully, the Mac won’t turn on issue is now fixed.

3. Rule out your display

I restarted my mac and now it wont turn on without

In rare cases, it might be your display that’s giving you all the trouble. Checking all the cables (if you’re on a desktop) for proper connection should be your first option, of course, but sometimes there could be a glitch with a battery power circuit that for some reason won’t trigger the screen light.

The thing is, your MacBook black screen is still working. One way to fix the problem, especially when your MacBook won't turn on this way, is to hold your laptop to a bright window to let the sun shine through the back of your screen. This way, you should actually be able to see enough to log in, after which your screen should turn on normally.

4. Repair your Mac in Recovery Mode

Going from cables to other external inputs to display, it’s natural to turn to your hard drive next, which could now be broken in some way. The good news is your Mac features a handy way to try to fix this called Disk Utility, which you can access through Recovery Mode.

To initiate Recovery Mode:

  1. Make sure your Mac is completely shut down

  2. Hold ⌘ + R and turn your Mac back on

  3. You’ll see a new window pop up with some options to choose from. Click Disk Utility ➙ Continue.

  4. Select your hard drive

  5. Click First Aid

  6. After the process is complete, turn your Mac off and on

5. Restart Mac in safe mode

If you’re still experiencing problems, it’s possible to restart MacBook in safe mode to bypass lots of small processes that might sidetrack your Mac from working properly.

Entering safe mode is easy:

  1. Turn off your Mac

  2. Power it back on while holding Shift

  3. Release Shift when you see a login menu

Now that you know the situation with your Mac is not hopeless, you’re getting closer to the finish line. Sometimes, you just need to restart MacBook once more for everything to work smoothly.

6. Reset your Mac’s NVRAM

Even when your Mac is turned off, there’s a special kind of memory that’s keeping tabs. It’s called non-volatile random-access memory (NVRAM) and in very rare cases can lead to problems booting up. But if you’ve already tried all the tips above, it could be a very rare case indeed.

To reset NVRAM:

  1. Turn off your Mac

  2. Hold ⌘ + Option + P + R and turn on your Mac

  3. Release the keys when you hear the second startup chime

7. Reset the SMC

Another vital operator in your Mac’s ecosystem is the System Management Controller (SMC). It handles keyboard backlighting, responds to you pressing the power button, manages your battery, etc.

Resetting the SMC is essentially the last thing you can do before you completely reinstall the macOS:

  • If you’ve got a MacBook, press Shift + Control + Option and power up

  • For iMacs, simply unplug the cable for 15 seconds, plug it back in, wait five more seconds, and then power up

8. Back up with Target Disk Mode

Naturally, you don’t want to lose any of your data while doing a clean macOS installation. But even if your Mac won't boot, you can still try to get the information out via a hack known as Target Disk Mode.

For this, you need a second Mac and a Thunderbolt cable:

I Restarted My Mac And Now It Wont Turn On
  1. Connect the two Macs

  2. Turn off your Mac completely

  3. Power your Mac back on while holding the T key until the cable icon appears on your screen

  4. Now your Mac’s hard drive should appear as an external one on the other Mac’s Finder

  5. Simply copy any files needed to the other Mac

Hopefully, if everything worked, your files are safe!

9. Get a new macOS

The final step of the MacBook Pro won't turn on saga is to reinstall the macOS, which should fix any software-related problems for sure.

To do so, just restart your Mac in Recovery Mode as described above (holding down ⌘ + R) and select the Reinstall macOS option from the menu. If any problems persist beyond this point, your next stop should be an appointment at the Apple Store’s Genius Bar.

Keep up-to-date backups and monitor your Mac

Truth be told, it’s exhausting and frustrating to go through every step outlined above, but might be necessary if you don’t keep regular backups and are not aware of the state your Mac is in. So, if the disaster hasn’t struck yet, let’s fix those things!

My Mac Won't Start Up

Recover lost data on Mac

My macbook air won t turn onWon

Install Disk Drill and stop worrying about your files. The app creates secure backups and can even bring your content back in case you lose it.

My Macbook Air Won T Turn On

Disk Drill is the ultimate app you need for timely and secure backups to an external hard drive. All done from a single and straightforward menu. What’s more, the app is also world-class at recovering deleted files too, so you never lose any files whatsoever again.

iStat Menus is another must-have utility that’s going to be responsible for your Mac’s wellbeing. Just a few icons in your menu bar can tell you the exact state of anything, from your battery to CPU to RAM, in real time. Then if you see your processor underperforming or memory being frequently maxed out, you can take preemptive measures and avoid the catastrophe completely.

As you can see, taking care of your Mac shouldn’t be hard — just two apps will do. And if you encounter a MacBook black screen or your Mac won't turn on, go through the checklist above to solve the problem in minutes.

I Restarted My Mac And Now It Wont Turn On How To

Best of all, Disk Drill and iStat Menus are both available to you for free for seven days via Setapp, a platform with over 160 essential utilities and apps that your digital life productive and secure. Just over to the Setapp website to start your trial: sure, you could’ve been doing backups for years, but the second-best time to start is now!

Setapp uses cookies to personalize your experience on our website. By continuing to use this site, you agree to our cookie policy.

Mac Won't Restart After Update